The V12 engine pairs with a six-speed manual gearbox.
Q by Aston, the automaker’s personalisation service, has a new, one-off creation – the Victor. It started life as a One-77, then Aston Martin turned it into a rolling homage to the company’s V8 Vantage of the 1970s and 1980s. But Q went far beyond adding a body kit and reupholstering the interior – there are few remnants of the One-77’s design inside or out, and it’s almost unrecognisable. It’s a slightly different story under the bonnet.
Powering the one-off Victor is the One-77’s original 7.3-litre naturally aspirated V12 engine. However, Aston tapped Cosworth to rebuild and retune the mill with a unique spec. It now produces 836 bhp (623 kilowatts) and 605 pound-feet (821 Newton-metres) of torque, which is quite an increase over the One-77’s original 750 bhp (559 kW) and 553 lb-ft (750 Nm).
Gallery: Aston Martin Victor
The mill now pairs with a six-speed manual from Graziano, making the Victor the most-power manual-equipped Aston. To handle the additional power, two transmission coolers and a “bespoke motorsport clutch” were added to handle the additional power. Also handling the power are six-piston carbon-ceramic brakes.
While the design hearkens back to vintage Astons, the Victor is packed with modern-day technology. At the rear, Aston used tech derived from the Valkyrie to design the taillights. Even the vintage appearance is functional, providing 608 lb-ft (825 Nm) of downforce at 100 miles per hour (160 kilometres per hour). That’s more than the 387 lb-ft (525 Nm) of downforce created by the race-prepped Vantage GT4 at the same speed. The suspension features the same inboard springs and dampers as the track-only Vulcan.
Inside, Aston spared no expense, leaving much of the carbon-fibre monocoque chassis exposed. Forest Green and Conker Bridge of Weir leathers contrast the dark carbon weave while the upper part of the cabin features cashmere. There’s walnut trim on the dashboard, though the most pleasing use of the wood is the single piece atop the manual gear knob. Aston uses anodised aluminium and machined and polished titanium for other trim and hardware pieces.
There’s no word on price because this is a one-off creation. It’s a stunning homage to Aston’s heritage while also showing how the tech from its high-powered hypercars like the Vulcan and Valkyrie have other uses.
BRUTISH. BOLD. UNIQUE. Q BY ASTON MARTIN CREATES THE VICTOR
04 September 2020, Gaydon: Aston Martin has unveiled its wildest Q by Aston Martin - Commission project to date in the form of the Aston Martin Victor. A bruising full carbon-fibre creation, the one-off model is powered by a 7.3-litre V12 engine producing 836bhp, making this the most powerful road-going naturally aspirated product ever and the highest performing manual powertrain in the marque’s history.
Unveiled to the backdrop of the 70th anniversary of the Vantage nameplate, this road legal creation has been fittingly inspired by the iconic Aston Martin V8 Vantage of the 1970s and 80s and the 70’s DBS V8 that was developed to race in the 24 Hours of Le Mans as the RHAM/1. The V8 Vantage embodies the period of Aston Martin stewardship by Executive Chairman Victor Gauntlett, today’s commission also takes inspiration from this key figure from the marque’s colourful history in its nomenclature.
Re-born colour schemes reminiscent of the V8 Vantage road car adorn the Victor, with an industry-leading paint finish of ‘Pentland Green’ and satin carbon fibre complementing the car’s dramatic exterior form. Along the side, the car features acontinuous hard line, providing a powerful square like shoulder which follows towardsthe car’s extreme rear boat tail. This theatrical element – derived directly from the RHAM/1 racer – continues to deliver on an impression of overt performance and aerodynamic capability. Aston Martin Valkyrie derived technology provides a pure and simple lighting solution at the rear, while – at the face - the iconic grille and unique headlamps honour the Victor’s true origins.
Inside, the cabin is cloaked in high-grade Forest Green and Conker Bridge of Weirleathers, while the finest tailor’s Cashmere is used for the car’s upper environment. These luxurious materials juxtapose the highly technical carbon fibre chassis, which remains largely exposed throughout the interior. Anodised aluminium and machined and polished titanium hardware add to the high-grade finish inside, while Crown cut solid walnut features across the car’s dashboard and, perhaps most importantly, as a single machined piece to adorn the car’s manual gear knob. A familiar feature toAston Martin aficionados is the Aston Martin Vulcan motorsport-derived steering wheel, which has been utilised in Victor too.
Combining elements of One-77 and Aston Martin Vulcan under the body, Victor is a melting pot of technical highlights from each of these highly limited iconic models, allowing the car to match the inferred performance in its design. In addition, the car benefits from the technical expertise of the same engineers and technicians who have been heavily engaged in the ongoing Aston Martin Valkyrie programme.
Built from an original fully refurbished One-77 carbon fibre monocoque and rear housing, the entire chassis and bodywork weighs in less than an original One-77. Delivered through computer fluid dynamic (CFD) testing, focused on delivering GT4 levels of downforce while providing the necessary cooling requirements of this testosterone fueled brute. Despite its muscle car styling, Aston Martin Victor can achieve 842Nm of downforce at 100mph, compared to 525Nm from the race-prepared Vantage GT4.
Under the heavily sculpted and vented bonnet sits an original One-77 naturally-aspirated 7.3-litre V12, which has been rebuilt and retuned to a new and unique specification by world-renowned engine builder – and original One-77 and now Aston Martin Valkyrie project partner – Cosworth. The engine delivers exceptional performance figures for a naturally aspirated road-going machine, producing 836bhpof power and 821Nm of torque, uprated from One-77’s previous 750bhp and 750Nm.
Driving all that power to the rear wheels is a six-speed manual transmission, supplied by Graziano, making Victor the most powerful manual sportscar to wear the iconic Aston Martin wings. To ensure both the usability and continued performance of the car’s powertrain given the exceptionally high levels of torque on offer, Aston Martin Victor is to be equipped with twin coolers and a bespoke motorsport clutch that delivers a performance focused and unique driving experience.
Perhaps in contrast to the muscle car machines of the 70s and 80s, the Aston Martin Victor has been engineered to deliver exceptionally focused dynamics, the car has been equipped with the same inboard springs and dampers as the track-only Aston Martin Vulcan. Available with six-stage settings, the setup has been honed to meet the demands of imperfect road driving conditions. Fitted with centre-lock wheels, the car’s 380mm front and 360mm rear Brembo CMM-R Carbon Ceramic brakes are set to deliver up GT3 race car levels of braking capability as each caliper’s six pistons engage.