The new Halo cockpit protection device, which is set to appear on 2018 F1 cars for the first time, needs to be strong enough to withstand the weight of a bus, says James Allison, technical director for the Mercedes F1 team. 

Adapting the chassis to take the device, which will be introduced for the first time this season, has proven to be difficult. Speaking in a video released by the Mercedes F1 team, Allison said adopting the Halo had been 'a significant challenge' for his outfit. 

'This is not a light piece of work, it is several kilograms of titanium that needs to be put in the car,' he said. 'There are changes that we needed to do to accommodate it to ensure the overall car would still stay below the weight limit. It's also not light because it takes really high loads. We had to strengthen the design of the chassis so it would be able to take roughly the weight of a London double decker bus sitting on top of the halo. 

'We needed to make sure it would be strong enough to withstand the type of event it was designed to protect the driver against.'

Also check out:


Allison said he expected the Halo to evolve in the coming years as teams look to minimise the aerodynamic impact while also improving the aesthetics. 'This round tube is quite bad aerodynamically so we're all permitted to modify the Halo in a way which will be individual for each team because we're permitted to fit an aerodynamic fairing around it, which gives us a certain amount of scope to mitigate the effect it has on the aerodynamics of the car,' he said. 

'What we're aiming to do is ensure the wake of the Halo does not affect the smooth running and performance of the engine so we make sure the wake of the Halo does not get ingested by the engine. We also make sure it is designed so that it doesn't damage the behaviour of the rear wing. 

'This is the first generation of head protection that goes up, over and around the driver's head. It's the first generation but it won't be the last. Nothing in F1 stands still for long. We will all be taking this first go and trying to improve it, trying to make sure the safety gets better but also the aesthetics. 

'It's a bit of an acquired taste and we're still acquiring it and I'm sure everyone else is too. But I'm sure there are things we can do in coming seasons to make it also look nicer in the car. The imperative to look after the driver safety and our desire to give us cars that are going to set the pulse racing aesthetically will see us continue to develop this concept in the seasons to come.'

Gallery: F1 halo device